Does anyone know where you set these settings up at?
ISAKMP Phase 1
----------------------
Main
Pre-Shared Secret provided via phone
AES-128, aes-192 or (AES-256 Preferred)
SHA1
Group 3
86,400 seconds (24 hours) timeouts
300 seconds (Confidence)
2 (Retry interval
IPSEC Phase 2
-------------------------
ESP
Tunnel
AES-128, AES-192, or AES-256, (AES-256 Preferred)
SHA1
28800 seconds (8 hours)
Our network is very simple. It is just a setup where all computers connect to hubs and a hub connects to the modem.
I looked these two phases up and I don't see where you make the changes for this information. I can't find anything in Active Directory.
ISAKMP Phase 1
----------------------
Main
Pre-Shared Secret provided via phone
AES-128, aes-192 or (AES-256 Preferred)
SHA1
Group 3
86,400 seconds (24 hours) timeouts
300 seconds (Confidence)
2 (Retry interval
IPSEC Phase 2
-------------------------
ESP
Tunnel
AES-128, AES-192, or AES-256, (AES-256 Preferred)
SHA1
28800 seconds (8 hours)
Our network is very simple. It is just a setup where all computers connect to hubs and a hub connects to the modem.
I looked these two phases up and I don't see where you make the changes for this information. I can't find anything in Active Directory.