BT Home Hub 3 as wireless access point

Hi,

I've been trying to configure a bt home hub 3 as a wireless access point, I must have tried a hundred different things to get this to work!

Let me describe the setup quickly.

Sky Fibre - with open reach modem and sky hub.
See speed test results below:


Belkin Gigabit Powerline HD - ethernet from sky hub to Powerline - other end ethernet cable to bt home hub 3.
A Netgear ReadyNAS nv+ v2 is also being used - of which we are currently lag when streaming HD movies.

As for Network settings, they are as follows:

Sky Hub
SSID: SKYDBD6B
IP address: 192.168.0.1
Subnet Mask: 255.255.255.0
DHCP range: 192.168.0.2 - 192.168.0.200
Wireless channel: 9

BT Home Hub 3
SSID: BTHub3-S8RM
IP address: 192.168.0.254
Subnet Mask: 255.255.255.0
DHCP: Disabled
Wireless channel: 1

Netgear ReadyNAS NV+ V2
Host Name (same as SSID?): Bramcroft-NAS
IP address: 192.168.0.201
Subnet Mask: 255.255.255.0
Default gateway: 192.168.0.1
DNS: 192.168.0.1


Can anyone see any issues with the above setup?
To confirm, the sky router has access to the internet as does the ReadyNAS drive.
The Home Hub does not have access to the internet.

Any help would be greatly appreciated!