Hey everyone
I have been sitting with this issue for 2 days now and i'm slowly going insane.
I just moved, and i am trying to setup my FTP server again on my Synology NAS, on the NAS, FTP is on, and DDNS is setup and seems to be working, so i should be able to access my NAS remotely.
This isn't working, so i suspect that port forwarding is the issue, also due to port testers saying basically every port is closed.
I am sitting behind 2 routers:
1. Router is a Icotera IGW3000, a combi router/modem from my ISP (ISP won't shut off the router function due to me being a private customer)
2. Router is my own D'Link DIR 857 Media Router.
Normally i would say that i am pretty tech savvy and know my Port Forwarding, and the FTP was working at one point in my old apartment, but after a factory reset of my D'Link, it stopped working again, and now i just can't seem to make it work. I do think there is a problemer with the 1. router not letting my own router handle things.
I have tried using DMZ from the 1. Router (IP:192.168.1.1) to my own router (IP:192.168.1.218).
Didn't do anything, then i tried port forwarding to the 2. router as well, no result either. And the 2. router should be forwarding the ports correctly to my NAS (Internal IP:192.168.0.100)
I hope you guys can help, cause i don't know what to do anymore :(
Håber i kan hjælpe, og beklager den lange forklaring, satsede på at så meget info som muligt var godt.
I have been sitting with this issue for 2 days now and i'm slowly going insane.
I just moved, and i am trying to setup my FTP server again on my Synology NAS, on the NAS, FTP is on, and DDNS is setup and seems to be working, so i should be able to access my NAS remotely.
This isn't working, so i suspect that port forwarding is the issue, also due to port testers saying basically every port is closed.
I am sitting behind 2 routers:
1. Router is a Icotera IGW3000, a combi router/modem from my ISP (ISP won't shut off the router function due to me being a private customer)
2. Router is my own D'Link DIR 857 Media Router.
Normally i would say that i am pretty tech savvy and know my Port Forwarding, and the FTP was working at one point in my old apartment, but after a factory reset of my D'Link, it stopped working again, and now i just can't seem to make it work. I do think there is a problemer with the 1. router not letting my own router handle things.
I have tried using DMZ from the 1. Router (IP:192.168.1.1) to my own router (IP:192.168.1.218).
Didn't do anything, then i tried port forwarding to the 2. router as well, no result either. And the 2. router should be forwarding the ports correctly to my NAS (Internal IP:192.168.0.100)
I hope you guys can help, cause i don't know what to do anymore :(
Håber i kan hjælpe, og beklager den lange forklaring, satsede på at så meget info som muligt var godt.